Weidmüller RX-900, Installation Manual

Page: 4 / 52

Safety Notes
2.1.7 Yagi antennas 18
2.2 Power supply 19
2.3 Inputs and outputs 20
2.3.1 Digital/Pulse inputs 21
2.3.2 Relay outputs 22
2.3.3 Status outputs 23
2.3.4 Analog input 24
2.3.4.1 Analogue Input Connections 25
2.3.5 Thermocouple input 26
2.3.6 Analog output 26
2.3.6.1 Analogue Output Connections 27
3 Factory Default configuration 28
3.1 Overview 28
3.2 Default signal mappings 28
3.2.1 Resetting WL-TX-900 to factory defaults 29
3.2.2 Resetting WL-RX-900 to factory defaults 29
3.2.3 Linking a transmitter and receiver unit 30
4 Configuration software 31
4.1 Overview 31
4.1.1 Configuration cable information 32
4.1.2 Installing/starting the software 33
4.2 Working with projects 33
4.2.1 Overview 33
4.2.2 Project options 34
4.2.3 Backing up and Restoring projects 34
4.3 Working with units 35
4.3.1 Overview 35
4.3.2 Adding units to a Project 35
4.4 WL-RX-900 Setup 36
4.4.1 Overview 36
4.4.2 Output Reset Times 37
4.5 WL-TX-900 Setup 38
4.5.1 Overview 38
4.5.2 Mappings 39
4