Configuration software
4.4
WL-RX-900 Setup
4.4.1 Overview
The main setup screen for the WL-RX-900 is shown below. As you can see the main
options are limited to changing the Unit name (see ‘Adding a unit’ above) and the unit
address (1-127).
For a printable summary of the unit’s setup, press <Unit Summary>.
The Diagnostics page is described in detail in the ‘Diagnostics’ section. Press the
<Diagnostics> button to see this page.
Below the unit name in the tree view you can select ‘Output Reset Times’. Click this to
display the output reset times in the right hand side pane. The operation of this pane is
described in more detail in the following section.
36
