![Weidmüller IE-SW-L3-SL28M Manual Download Page 46](http://html1.mh-extra.com/html/weidmuller/ie-sw-l3-sl28m/ie-sw-l3-sl28m_manual_952378046.webp)
User Manual Managed Switches
44
Configured Link Speed
Setting
Description
Factory
Default
Disabled
Immediately shuts off port access.
Auto
Auto
Allows the port to use the IEEE 802.3u protocol to
negotiate with connected devices. The port and
connected devices will determine the best speed for
that connection.
10 Mbps HDX
Forces the RJ45 port in 10Mbps half-duplex mode.
10 Mbps FDX
Forces the RJ45 port in 10Mbps full-duplex mode.
100 Mbps HDX
Forces the RJ45 port in 100Mbps half-duplex mode.
100 Mbp FDX
Forces the RJ45 port in 100Mbps full-duplex mode.
1 Gbps FDX
Forces the RJ45 port in 1Gbps full-duplex mode.
Auto (SFP)
Automatically determines the speed of the SFP
transceiver.
Note: There is no standardized way for the SFP auto
detect, so in the switch is done by reading the SFP
ROM. Due to the missing standardized way of
autodetection in SFP transceivers, some of them may
not be detectable.
100 Mbps FDX
(SFP)
Forces the SFP port in 100Mbps full-duplex mode.
1 Gbps FDX
(SFP)
Forces the SFP port in 1Gbps full-duplex mode.
NOTE:
If a connected device or sub-network is wreaking havoc on the rest of the
network, the
Disabled
option gives the administrator a quick way to shut off access
through this port immediately.
Advertise Duplex
Setting
Description
Factory
Default
Check / Uncheck
Fdx, Hdx
When duplex is set as auto i.e auto negotiation, the
port will only advertise the specified duplex modes
(Fdx or Hdx) to the link partner.
All checked
Advertise Speed
Setting
Description
Factory
Default
Check / Uncheck
10M, 100M, 1G
When speed is set as auto i.e auto negotiation, the
port will only advertise the specified speeds
(10M 100M 1G) to the link partner.
All checked