User Manual Managed Switches
215
Intermediate
(RMirror)
The intermediate ports are located on this switch.
Destination
(RMirror)
The destination port(s) and intermediate port(s) are
located on this switch.
VLAN ID
Setting
Description
Factory
Default
1 to 4095
When Remote Mirroring is activated, the VLAN ID
points out where the monitor packet will copy to.
200
Reflector port
Setting
Description
Factory
Default
Port of the switch
The reflector port is a method to redirect the traffic to
Remote Mirroring VLAN. Any device connected to a
port set as a reflector port loses connectivity until the
Remote Mirroring is disabled. The reflector port needs
to be selected only on Source switch type and only
supports pure copper ports.
Port 1
Source VLAN(s) Configuration
Setting
Description
Factory
Default
1 to 4095
The switch can support VLAN-based mirroring. If you
want to monitor some VLANs on the switch, you can
set the selected VLANs on this field.
200
Port Configuration
Source
Setting
Description
Factory
Default
Disabled
Neither transmitted nor received frames are mirrored.
D
isabled
Both
Transmitted and received frames are mirrored on the
Destination or Intermediate port.
Rx Only
Received frames are mirrored on the Destination or
Intermediate port. Transmitted frames are not
mirrored.
Tx Only
Transmitted frames are mirrored on the Destination or
Intermediate port. Received frames are not mirrored.
Intermediate
Setting
Description
Factory
Default
Check / Uncheck
Select intermediate port (applicable only to Remote
Mirroring). The intermediate port is a port of the switch
to connect to another switch.
Unchecked
