User Manual Managed Switches
15
See a brief explanation of each configuration parameter below.
IP Configuration
Mode
Setting
Description
Factory
Default
Router
Mode that enables the Layer 3 capabilities of the
switch. With this mode the switch allows routing of IP
traffic between interfaces to be carried out.
Router
Host
Mode that disables the Layer 3 capabilities of the
switch. With this mode the IP traffic between interfaces
will not be routed.
IP Interfaces
When the IP Configuration is in
Router
mode, the user can assign different IP addresses to different
VLANs with hardware routing between them.
The button
Add Interface
has to be used to create a new IP interface. The user has to fill the
parameters described below and can delete any existing interface by enabling
Delete
and pressing
the button
Apply
.
VLAN
Setting
Description
Factory
Default
Number between
1 and 4095
The VLAN associated to the IP interface.
NOTE: Only the ports inside this VLAN will be able to
access to the IP interface so is important to specify the
ports belonging to the VLAN in the option “VLAN
Membership” of the VLAN menu.
1
DHCPv4
Setting
Description
Factory
Default
Disabled
The Weidmüller switch’s IP address must be set
manually.
Disabled
Enabled
The Weidmüller switch’s IP address will be assigned
