Operation
1449820000/1.4/04.17
89
5.2.4
Setting material-dependent slip
The material-dependent slip correction must take place for every MultiCard version, as it must be
set material dependently.
1
From the menu bar choose Tools → Printer Settings → Set Material-Dependent Slip...
2
Insert, for example, a DEK 5/5 MC-
10 NEUTRAL WS MultiCard in the printer (also see section “5.1.2
Inserting MultiCards/MetalliCards
Figure 103
Setting material-dependent slip
3
Print a rectangle of the specified size (228 x 46 mm) by pressing the [Print Rectangle] button.
4
Remove the printed MultiCard from the printer.
5
Measure the size of the printed rectangle.
