Diesel Gen-set Operation Instructions
23
15. When mains power (mains power system supplies power to loads, which is
applicable when AMF function is used) is switched on, green light turns on
16. When common alarm is generated, green light turns on
17. When low oil pressure alarm is generated, green light turns on
18. When high water temperature alarm is generated, green light turns on
19. When AUTO mode is enabled, green light turns on
Note: 4 LED indicator lights are customized according to actual needs in 16-19 and
these 4 LED indicator lights customized here are taken as an example only.
2. Power switch
Control power on/off of control panel.
3. Emergency stop button
Press this button to stop the Gen-set immediately when any emergency occurs. And,
the Gen-set is unable to be started under this state. When the emergency situation is
over, the Gen-set can be started only after emergency stop button is released.
4. Air switch
Except closing and opening of circuit, it is still available for short-circuit and serious
overload protection of circuits or electrical equipment.
