Î
Put the
peg (Pos. 3) back into the
bore of the
base unit (Pos. 1) and the
clamping lever (Pos. 2).
Î
Bend the
key ring (Pos. 4) slightly apart
and twist it back into the bore
of the peg (Pos. 3).
Î
Disconnect the WEH
®
Connector from the test piece again. Please refer to
Chapter 8. Operation on page 17
.
Î
Connect the WEH
®
Connector to a test piece a number of times. Visually check
the connector for proper clamping and sealing function and that the clamping
jaws are gripping correctly.
Attention:
During the next pressure test, apply the test pressure to the connector
and media line only gradually.
MD-10015-L51-R1.1.0-03
Page 29
Operating instructions
AE
