Î
Roll the new additional
retaining ring (Pos. 6) over
the shaft (Pos. 11) into the
area between the
retainer plate (Pos. 8) and the
spacer (Pos. 10).
Î
Lift the new additional
retaining ring (Pos. 6) with the
WEH
®
O-ring picker.
Î
Insert the first clamping jaw
segment (Pos. 9) with the
raised side facing the
front seal (Pos. 7).
Î
The retaining ring must be
seated in the recess provid-
ed for it in the clamping jaw
segments.
Î
Now mount the remaining
segments of the clamping
jaws.
Î
Roll the new
retaining ring (Pos. 5) over
the large diameter of the
shaft (Pos. 11) into the pro-
vided recess of the clamping
jaw segments (Pos. 9).
Î
Connect the WEH
®
Connector to a test piece a number of times. Visually check the
connector for proper clamping and sealing function and that the clamping jaws
are gripping correctly.
Attention:
During the next pressure test, apply the test pressure to the connector
and media line only gradually.
MD-10015-L51-R1.1.0-03
Page 27
Operating instructions
AE
