Wegener UNITY4650, User Manual

Page: 60 / 92

Unity 4650 User’s Manual
800034-01 Rev. A 60 wegener.com
PERMCH value
value : Either the value of a settings table entry number OR the Channel Label
of an entry, priority given to Label if any ambiguity. If an entry number, legal
values range from 1 up to N (where N is number of Preset support this product).
Unit Settings set to equal those in the Preset Table entry specified by value .
PING [-t] [-n count] [-l size] [-w timeout] addr
-t :If supplied as shown, PING specified host until interrupted by console-entry
of ‘control-C’.
-n count :Integer substituted for count is number of echo requests to send.
-l size :Send buffer specified as size bytes.
-w timeout :Wait for each reply the number of milliseconds specified by timeout.
addr :IP address formatted as n1:n2:n3:n4 where n1, n2, n3, and n4 are integers
between 0 and 255.
Traditional Unix PING command with verbatim Unix syntax. Response from
IRD will indicate success or failure. User will be warned if PING cannot be
attempted because no local IP address has been set. A Local Control Command
(available from the terminal regardless of "Local Control Enable/Disable"
commands from the network).
PORT device
device : Device assigned to the AUX/TERM port, either TERMINAL,
MODEM or AUXDATA.
Assigns the given device to the Aux/Term port. A Local Control Command
(available from the terminal regardless of "Local Control Enable/Disable"
commands from the network).
PW password
password : One to six alphanumeric characters.
Changes the modem password to password. A Local Control Command (avail-
able from the terminal regardless of "Local Control Enable/Disable" com-
mands from the network).