Wegener UNITY4650, User Manual

Page: 48 / 92

Unity 4650 User’s Manual
800034-01 Rev. A 48 wegener.com
3.3 Operation from Local/Remote Terminal
Overview and
syntax The following discussions apply to control by both the Terminal and Modem
devices. Once a user has fulfilled the password requirement for Modem access,
the communication is identical to Terminal control.
Commands listed in this section detail command syntax and action taken.
Commands consist of a command field and a parameter field. Each command
field and parameter field is space delimited. Optional parameters are indicated
by square brackets, [ ], and conditional parameters are indicated by braces, {}.
For example, COMMAND_NAME parameter1 { parameter2 } [ parameter3 ]
indicates that parameter1 must be entered, parameter2 entered only when a
certain condition is met (certain option is installed, etc.), and parameter3 is
optional. Both commands and parameters may be entered in upper or lower
case; the interface is not case-sensitive.
Incorrect or incomplete commands result in "Invalid Command" being displayed
at the terminal. Parameter errors on User commands generate "Invalid
parameter
name " where parameter name is the name of the incorrectly entered parameter.
User
commands NOTE: Any commands controlling carriers, programs, or services may be
disabled from COMPEL

.
ABORT
Insert is terminated. See TEMP command.
ABORTREC x
x : C - make the unit’s permanent setting equal to the last commanded setting
S - make the unit’s permanent setting equal to the last successful setting
Command either 1) aborts an ongoing automated recovery; 2) aborts the suc-
cessful results of an automated recovery; or 3) accepts the successful results of
an automated recovery. With either value for
x , this command is interpreted as
a direct local user command to establish/confirm the unit’s permanent settings.
ADDE
location COMPEL-req [tags-req] [aud1] [aud1_rt] [aud2] [aud2_rt]
[margin]
location : Value from 1 up to max (highest entry #) indicating location in Preset
table.