Wegener UNITY4650, User Manual

Page: 43 / 92

Unity 4650 User’s Manual
wegener.com 43 800034-01 Rev. A
Unit Status/History
Allows user to access unit status and diagnostics. Typical items located
under this menu include:
1.Current unit state
2.Signal Quality
3.Last commanded and last successful unit settings
4.Program Analysis
5.Local audio/video decompression history
6.Network control status/history
7.Current LAN settings
8.Unit internal temperature
9.Option module presence/status
10.Unit information screen (including software version)
11.Control to clear diagnostics
Unit Setup
Allows user to control unit. Typical controls located under this menu
include:
1.Set permanent unit settings (tuning, program, audio selection, etc.)
2.Add/edit/move/delete Presets
3.Genlock controls (shown if option is installed)
4.NTSC pedestal
5.Aspect ratio control
6.Rate buffer control (PCR offset)
7.Audio attenuation
8.Audio front-panel monitor selection
9.Muting
10.VBI line re-insertion enable
11.Recovery mode timeouts
12.Serial port setup
13.LNB LO frequency set
14.LNB DC power set
15.User cue relays
16.Signal quality indicator thresholds
17.Minimum alarm/warning indication times
18.Encryption controls
19.LAN settings
20.NVRAM operations
21.Alarm (history) latching enable
22.Current unit software selection
23.Unit label edit
24.Unit reset control