Wegener UNITY4650, User Manual

Page: 54 / 92

Unity 4650 User’s Manual
800034-01 Rev. A 54 wegener.com
GLPHASE phase
phase : Integer between -180 and +180 inclusive.
Command to adjust the subcarrier phase of genlocked composite video output,
relative to the reference. The offset in degrees is set by the
phase parameter,
with the actual register values set for the nearest degrees of adjustment reso-
lution. Positive settings of phase will force the video subcarrier phase to lead
the genlock reference. For example, a setting of -10 directs the unit to use -9.9°
of backward offset. Entering the command without the
phase parameter causes
the unit to report the current SC phase offset setting.
H [ command ]
command : Any of the terminal command names (PC, R, PORT, etc.).
If an ‘H’ or any invalid command beginning with an 'H' is entered and com-
mand is omitted, the whole help screen will be displayed, consisting of a list of
all currently available commands and a brief description of each listing. If an
‘H’ or any invalid command beginning with an 'H' is entered and
command is a
valid User Command Name, then detailed help for command is displayed. A
Local Control Command (available from the terminal regardless of "Local
Control Enable/Disable" commands from the network).
INDPERS indication time
indication :“A” (for “Alarm”) or “W” (for “Warning”).
time :Time in seconds.
Command to set the minimum indication-time persistence for either Alarms or
Warnings, per the value of indication, for the time period given by time. Enter-
ing command without parameters shows the current settings. A Local Control
Command (available from the terminal regardless of "Local Control Enable/
Disable" commands from the network).
IPCONFIG
Command requests report of all current IP parameters (IP address, Gateway
address, subnet mask) and assignment mode (static or DHCP). A Local Con-
trol Command (available from the terminal regardless of "Local Control
Enable/Disable" commands from the network).
2