Wegener UNITY4650, User Manual

Page: 41 / 92

Unity 4650 User’s Manual
wegener.com 41 800034-01 Rev. A
LCD screen
relationships Figure 3.3 below shows LCD screen relationships from the top level down-
ward. These screens are structured in two dimensions, reflecting their relation-
ships as peers, as parents, and as children of other screens. The up-and-down
dimension represents the parent-child screen relationships (navigated with the
ESC
and
ENT
buttons). The side-to-side dimension is the peer relationship
(navigated with the right- and left-arrow buttons). A parent screen is usually a
menu screen covering some category of U4650 operation or status. Its child
screens are opened by pressing
ENT
at the parent screen. These child screens
then provide access to finer details of unit monitoring and control. Multiple
child screens of a parent menu screen are all peers to each other. However, the
most significant set of peer screens are the top-level screens that have no par-
ent and that include the home screen. The home screen may be reached by press-
ing and holding
ESC
(or pressing it repeatedly) from any other LCD screen.
Appendix A Monitoring and Control Details gives more details on screen
types and using front-panel push buttons to navigate and control the U4650.
Figure 3.3 LCD Screen Relationships
LCD screen
content
Available top-level screens are shown in order in
Figure 3.4 Unity 4650 Top-
level Screens on page 42. Some screens are only available under certain unit
conditions or when certain optional hardware is installed. These optional
screens are represented by hatched boxes. A list of the top-level screens and
their functions follows:
Home Screen
Shows basic receive settings and indications about special unit conditions
Alarm/Warning Screens (when applicable)
•Shows current alarms and warnings if any
•Shows historic alarms
•Allows user to clear historic alarm indications & acknowledge/clear cer-
tain warnings