Wegener iPUMP 6400, User Manual

Page: 40 / 85

Operation
30 800009-01 Rev. J www.wegener.com
3.6 Front Panel Additional Unit Setup
Some of the
iPump 6400
front panel settings are important, but not essential to the unit’s
initial setup including:
!"
Date/Time Setup
!"
Unit Label Setup
!"
HTTP Proxy settings
!"
Return Path Setup
Navigation to
Date/Time
Setup Screen
Set up the date and time for the
iPump 6400
during the initial setup. Use the front panel
navigation buttons to go to the
Date/Time
screen as shown in
Figure 3.14
.
Figure 3.14: LCD Menu navigation to Date/Time Setup screen
Date/Time
Setup
When operating under the
Compel
network, date and time settings are overwritten by
Compel
. However,
Time zone
and
Daylight Savings Time
settings remain under local
control and should be set by the user.
From the
Date/Time
screen, you can set or adjust the:
!"
current date
!"
current time
!"
offset from GMT (Greenwich Mean Time)
!"
DST (Daylight Savings Time) observance
Note: Date/Time Setup
may also be performed from the web browser. See
Date / Time
Setup
on page 41.
Table 3.8
on page 30 details the procedure for adjusting the
Date/Time
settings.
Table 3.8: Procedure for setting Date/Time parameters
Begin from the
Date/Time Setup
screen.To change the screens, see
Editable Data Fields
on
page 20 and
Selectable Fields
on page 21.
Step Press Displayed/Field Details Screen Type
1.
ENTER CURRENT DATE
YYYY / MM / DD
Enter
Current Date
in
year/month/day
format.
Editable
2. #
CURRENT TIME
HH: MM: SS
Enter
Current Time
in
hours:minutes:seconds
format.
Editable