Wegener iPUMP 6400, User Manual

Page: 38 / 85

Operation
28 800009-01 Rev. J www.wegener.com
Figure 3.11: Menu navigation to set Transport In Current Channel
Table 3.5: Procedure for adjusting Transport In Current Channel settings
Begin from the
Transport In Setup
screen. See
Navigation to Transport In Setup Screen
on
page 27.
LNB Type
Available
LNB Types
are
Multiswitch
,
Universal/Astra
, and
Local Oscillator
. Select the
LNB Type
from the
Transport In Setup
screen.
Figure 3.12
and
Table 3.6
detail the
procedure for selecting the
LNB Type
.
Note: LNB Setup
may also be performed from the web browser. See
LNB Setup
on
page 40.
Step Press Displayed / Field Details
Screen
Type
1.
ENTER TRANSPORT IN STATUS: TRACKING: Eb/No = XX. X
Transport In Status
is shown. If the
iPump 6400
unit is
Tracking
, then the screen also displays
Eb/No
.
Data
Display
2. #
CURRENT CHANNEL
Menu
3.
ENTER DOWNLINK FREQUENCY: XXXXX. XX MHz
Enter the
Downlink Frequency
from the LNB local oscillator in
MegaHertz.
Editable
4. #
TRANSP. DATA RATE: XXX. XX Mbps
Enter
Transport Stream Data Rate
in Megabits per second.
Editable
5. #
RF- MOD / FEC RATIO: QPSK 3 / 4
RF Mod
ulation is
QPSK
. Available
F
orward
E
rror
C
orrection
Ratios are
1/2
,
2/3
,
3/4
,
5/6
,
7/8
, and
8/9
.
Selectable
6. #
PROGRAM NUMBER: 00001
Enter the
Program Number
or code of the program to be
selected from the transport stream.
Editable
7.
#
TAG SITE:
Values entered in this field do not affect
iPump 6400
operation.
<Unused>
8.
#
SAVE ALL CHANGES?
YES <ENTER> NO <ESC>
Press
ENTER
to save all the
Transport In Setup
changes or
press
ESC
to cancel the changes. The
iPump 6400
returns you
to the
Current Channel
screen.
Selectable