background image

25

Wegaconcept

User manual

ENGLISH

16

  Checks and cleaning

16.1 

Checks and maintenance

To ensure perfect safety and effi

  ciency of the 

machine over time, it is necessary to carry out  
maintenance. In particular, 

it is advisable to ask the 

Technical Service to carry out an overall check of 
the machine at least once a year. 

Checks 

D

aily

W

eekly

Monthly

MACHINE

Using the machine's display, check that the 

• 

pump pressure indicated is around 8-9 bar.
Check that the boiler pressure indicated on 

• 

the display is consistent with a programming 
value. 
In case of anomalies, contact the Technical 

• 

Support Service.

X  

PORTAFILTER FILTERS

Check the wear of the fi lters, if there is dam-

• 

age to the edges and check if coff ee grounds 
are getting into the cup. If necessary replace 
the fi lters.

X  

GRINDER-DOSER

Check the dose of the ground coff ee, which 

• 

should be about 6-7 gr. at a time, and adjust 
the amount as necessary.
Check the degree of grinding and modify as 

• 

required.
Check the grinders for wear: they should be 

• 

replaced if there is too much powder in the 
ground coff ee.

X  

SOFTENER

Carry out regeneration of the softener (for the 

• 

manual softener).
Check that there is salt in the container (for the 

• 

softener in the automatic version).

X  

16.2 

Cleaning

For perfect hygiene and effi

  ciency of the unit, a 

few simple cleaning tasks are required.

The indications given here are applicable for 

normal use of the coff ee machine. If the machine is 
used intensively, then cleaning should be performed 
more frequently. When cleaning, always use cloths 
that are completely clean and hygienic.

Cleaning

D

aily

W

eekly

Monthly

CAPPUCCINO MAKER

Clean several times a day as indicated in par. 
14.2, especially if used continuously.

XXX

 

FILTERS and PORTAFILTERS

Use a screwdriver to detach the fi lter from the 
portafi lter.
Clean the inside of the portafi lter with a brush and 
wash the fi lter and portafi lter with hot water.
Failure to clean the fi lters and portafi lters will 
compromise the quality of the coff ee and also 
cause problems such as bad extraction and cof-
fee grounds at the bottom of the cup.

X  

STEAM NOZZLE / AUTOSTEAMER 

Keep the nozzle clean at all times using a cloth 
dampened in lukewarm water.

X  

STEAM NOZZLE / AUTOSTEAMER TERMINALS

Check and clean the tips of the nozzle, clearing 
out the steam outlet holes with a small needle.

BODY

Clean the panels of the body with a cloth 
dampened in lukewarm water. Do not use abra-
sive detergents which may scratch the surface 
of the body.

X  

PERFORATED DISK and
CONTAINMENT RING

Loosen the screw (

A

and Remove the 
perforated disk (

B

)

and the containment 
ring (

C

) from the

 dispensing group.
Wash with hot water.

C

B

A

Summary of Contents for WegaConcept 2Gr

































Reviews: