WEEDO F192, User Manual

Page: 43 / 57

41 42
GB
Tear out tape sticker (1) on the printing platform from the bottom of left side, strip
slowly, don't leave any residuals, and then paste the new stickers (1).
Note that it doesn't leave gap between the stickers (1).
7.1.3. Replacing Air Filtration Core Components
The air filtration core components are suggested to be replaced after use 500
hours, otherwise it would lead to dust filtration effect greatly reduced.
Maintenance Method:
Firstly, use strength to take out the fan cover board entirety at the right side of
printer, and then find out one filtration core component cover board from the list
box in accompany with printer and install it directly.
7.1.4. Printing Platform Regular Check and Leveling
It is very important to perform the regular check and leveling on the printing
platform, and the level of printing platform would play severe impact the model’s
molding.
Leveling Method:
Nozzle gap adjustment:
Press “Level build plate” in the “Adjust” menu, the printer will automatically level the
build plate. Please operate according to the screen tips and keep the build plate in
rising status until hearing the sounds, it means the leveling operation is
finished.Press the return button to the previous menu.