WEEDO F192, User Manual

Page: 42 / 57

7.1. Printer Regular Maintenance Guide
The regular maintenance mainly contains: clean printer nozzle, replace the printer
platform sticker (1), printer platform regular check and leveling, replace air
filtration core, optical shaft and screw rod maintenance and others.
7.1.1. Cleaning Printing Nozzle
In the process of 3D printing, the part of consumable debris and dust particles is
likely to accumulate around the printing nozzle. As time goes on, these
accumulative materials can lead to that printing precision becomes poor or nozzle
is block and others. Therefore, before printing for each time, it needs to observe
whether the nozzle is blocked and perform the cleaning.
Maintenance method: The printing nozzle is usually cleaned by tweezers (10), and
the impurities around nozzle are wiped out by the cleaning cloth.
7.Regular Repair and Maintenance
3D Printer needs to perform the regular maintenance, as well as some daily
maintenance, in order to ensure the printer can maintain the high performance to
run stably.
7.1.2. Replacing Printer Platform Sticker (1)
Check whether the printer sticker (1) surface is worn and uneven on the printing
platform, if sticker (1) is worn, it must be replaced, and avoid the model falling from
the platform when printing.
Maintenance method: firstly find out a roll of tape sticker (1) presented in
accompany printer on the accessories box.