WEEDO F192, User Manual

Page: 29 / 57

27 28
GB
The left of the screen is a sketch of your machine, on the sketch exist several arrow
buttons of the Jog Controls of the XYZ axis. Click the corresponding button of each
axis, the motor will operate accordingly. The right boxes beside the sketch show Jog
Mode control, you can choose the movement distance of every click. Below the
sketch you can adjust the speed of each motor.
The right of the screen displays control boxes of the motor controlled the nozzle.
You can choose the Motor Speed, Extrude duration and the direction of the motor.
Note: Only when the nozzle has filament in it and the nozzle has been heated to the
proper temperature, you can let the motor make a positive or reverse movement.
Otherwise the motor gear will slip when wear occurs and seriously affect the life of
the nozzle.
The lower right part is the temperature control of the nozzle. You can change the
temperature of it by inputting the figures into the text boxes. If you change the
temperature of the nozzle simultaneously, the machine would preheat the nozzle.
The lower left part enables you to decide whether you want to control the stepper
motor.
5.2.5. Toolbar of Control Panel
1.View
Click the “View” button in the toolbar on the right. You
can click and drag in the preview window to rotate your
view by using both left and right mouse button. Click
the button in the Preview window reset or change your
view direction.
Default
XY
XZ
Reset the object to a default orientation
Top view
Front view
YZ Side view
2.Move
Go to the "Move" panel. Click and left drag to move your
object in the Preview window, click and right drag to
rotate your view direction. Click the button in the Move
panel to move the object by specific amounts.