M1200
–
User manual
–
English (EU)
–
01/03/2018 - ISSUE 2
20
If the red light fails to switch off after bleeding there is a
system fault. The M1200 should be switched off until the
fault has been corrected by a competent service engineer.
RED ‘FAULT’ AND FLASHING AMBER LIGHT
An illuminated red fault light and flashing amber light
indicates the boiler is too hot. The M1200 should be switched
off and checked by a competent service engineer.
GREEN
AND AMBER WITH FLASHING RED ‘FAULT’ LIGHT
A flashing red fault light with illuminated green and amber
lights indicates one of the fluid levels is low (water,
Foamstream® or diesel). The levels should be checked and
filled up accordingly.
THE M1200 SHOULD BE SWITCHED OFF AND CHECKED
BY A COMPETENT SERVICE ENGINEER IF IT DOES NOT
OPERATE AS EXPECTED, OR THE LIGHTS ILLUMINATE IN
A DIFFERENT WAY THAN EXPLAINED.