Weco WF-107, Instruction Manual, Page: 4 / 32

Cod.006.0001.1260
10/07/2017 v2.14
ENGLISH
WF-107
4/32
1 INTRODUCTION
IMPORTANT!
This handbook must be consigned to the user prior to
installation and commissioning of the unit.
Read the "General prescriptions for use" handbook supplied
separately from this handbook before installing and
commissioning the unit.
The meaning of the symbols in this manual and the associated
precautionary information are given in the "General
prescriptions for use”.
If the "General prescriptions for use" are not present, it is
mandatory to request a replacement copy from the
manufacturer or from your dealer.
Retain these documents for future consultation.
KEY
This symbol identifies an action that occurs automatically as
a result of a previous action.
This symbol identifies additional information or a reference to
a different section of the manual containing the associated
information.
§ This symbol identifies a reference to a chapter of the manual.
This symbol accompanies important information concerning
the execution of the relevant operations.
Wire feeder WF-107 is designed for connection to a power source for
MIG/MAG welding.
The welding modes and procedures available are those indicated in the
table.
MODE PROCEDURE
MIG/MAG CONTINUOUS
TWO STEP (2T)
FOUR STEP (4T)
MIG/MAG INTERVAL WELDING
TWO STEP (2T)
MIG/MAG SPOT WELDIG
FOUR STEP (4T)
THREE LEVEL (3T)
2 FRONT PANEL
1 2
3 4 5
1: Remote controller connector.
2: Provision for connection of the push pull torch (purchasing and
installing the relative kit).
3: EURO TORCH welding socket.
4: Connector for torch cooling liquid return hose.
5: Connector for torch cooling liquid outlet hose.
3 REAR PANEL
1
2
3
4
5
1: Male socket for the connection of the power cable coming from
the bundle of cables.
2: Gas rear connector. This is for the connection of the gas pipe
coming from the bundle of cables.
3: Cable bundle signal connector.
4: Outlet connector for cooling liquid from the cable bunch.
5: Return connector for cooling liquid from the cable bunch.