Weco WF-107, Instruction Manual, Page: 17 / 32

WF-107
Cod.006.0001.1260
10/07/2017 v2.14
ENGLISH
0
17/32
11 WELDING SETTINGS
11.1 MIG/MAG WELDING
S6 Use this button to select one of the following welding modes:
MIG/MAG CONTINUOUS
MIG/MAG INTERVAL
WELDING
MIG/MAG SPOT WELDIG
S5 Use this button to select one of the following torch trigger procedures:
2 STEP 4 STEP 3 LEVEL
11.1.1 SETTING MIG/MAG PARAMETERS (MAIN WELDING PARAMETERS)
S1 Press this button to scroll the list of settings to edit.
The LED associated with the selected setting will illuminate.
The value relative to the selected setting appears on the following displays: D1
The following settings are available:
WIRE FEED RATE AMPERES THICKNESS PROGRAMS
E1 Using the encoder, edit the value of the selected setting.
The value is saved automatically.
E2 Using the encoder, edit the value of the following setting: WORKING VOLTAGE
The value is saved automatically.
POT1 Using the potentiometer, edit the value of the following setting: WELDING INDUCTANCE
Tab. 5 - Main welding parameters in MIG/MAG mode
PARAMETER MIN DEFAULT MAX
WIRE FEED RATE 1.5 m/min 5.0 m/min 22.0 m/min
MIG/MAG WELDING CURRENT - Syn - *1
THICKNESS - Syn - *1
PROGRAMS P0 P0 P34
WORKING VOLTAGE 10.0 V 20.0 V 40.0 V
WELDING INDUCTANCE 0 - 255
Tab. 6 - Programmed synergic curves
WIRE DIAMETER
ACRONYM WIRE MATERIAL (GAS MIXTURE)
0.8 1.0 1.2 1.4
PR
OG
R
A
M
S
P0 P0 P0 P0 MAn MANUAL
P1 P2 P3 -- FE SG2/SG3 (80%Ar-20%CO2)
P4 P5 P6 -- FE SG2/SG3 (92%Ar- 8%CO2)
P7 P8 P9 -- FE SG2/SG3 (100%CO2)
P10 P11 P12 -- S.S. INOX 308 (98%Ar-2%CO2)
P13 P14 P15 -- S.S. INOX 316 (98%Ar-2%CO2)
P16 P17 P18 -- AL AlMg5 (100%Ar)
P19 P20 P21 -- AL AlSi5 (100%Ar)
P22 P23 P24 -- CU.S. CuSi3 (100%Ar)
P25 P26 P27 CU.A. CuAl8 (100%Ar)
-- -- P28 P29 rFC RFCW (80%Ar-20%CO2)
-- -- P30 P31 bFC BFCW (80%Ar-20%CO2)
-- -- P32 P33 MFC MFCW (80%Ar-20%CO2)
P34 -- -- -- nPr FREE PROGRAMS
*1: SYN= By synergy we mean a simple and fast way to regulate the generator. Through this function, an optimum balancing of all the welding
parameters in every position can be granted, thus helping the user.
This is the reason why the synergic curves of most of the wire types have been introduced, however these curves can be easily modified so
as to allow the user to optimise his own welding procedure.
NOTE: The synergic curves were created with reference to a fillet weld in position PB (horizontal-vertical) with 10 mm stick-out (distance from
torch to workpiece).