103160_SHB_Rev2.1_080611
MPE 750 Turbo Marine
Closed Loop
x
1
Service Manual
Page 14
Changing the motor oil and oil filter
-
Oil extraction pump
-
Catch basin for old oil, fill volume at least 4 liters [4.3 qt (US)]
-
Flathead screwdriver or wrench to open the screw clamps
-
Torque wrench to close the screw clamps
-
Torque wrench SW27 [1 1/16 “] for oil filter cover
-
Possible hose extension for oil feed hose with screw clamps
-
Funnel tube for motor oil
-
Motor oil, see chapter Operating materials
-
Oil filter, see spare parts catalogue
Draining the motor oil
With a motor warm from operation, the greatest oil volume is sucked out of
the motor.
1)
Unscrew the oil dipstick from the
oil tank.
See
Chapter
Oil level check
.
2)
Insert the suction hose of the oil
extraction pump into the oil tank
through an opening in the cover (1)
until it reaches the bottom of the oil
tank. X = 260 mm [10.25 in.].
3)
Pump all the motor oil out.
4)
Remove the suction hose and
insert the oil dipstick again.
