Weber Markoprint XB4JET, Manual For Installation, Operation And Maintenance, Page: 15 / 162

Safety 72800153 Markoprint XB4JET / XB8JET
Seite 15 von 162 GB
Staff requirements
Qualifications
WARNING!
Inadequate qualification poses danger of injury!
Improper use may lead to severe personal injury and to material damage.
Therefore:
–all tasks to be performed only by staff qualified for the task.
The operating manual specifies the following qualifications for different areas of
operation:
Instructed person
has been instructed by the operating company on the work with which he/she has been
tasked and on possible risks arising from improper actions.
Specialist staff
are, based on their technical training, knowledge and experience as well as their
knowledge of relevant provisions, capable of executing the tasks assigned to them and
to independently recognise and avoid possible risks.
Electrician
is, based on his/her technical training, knowledge and experience as well as knowledge
of relevant standards and provisions, capable of executing tasks on electrical equipment
and
independently recognising and avoiding possible risks.
The electrician is trained for the specific area of application and is familiar with the
relevant standards and provisions.
Only staffs capable of executing their work reliably are authorised. Persons whose
reaction capability is affected by drugs, alcohol or medication, for instance, are barred.
Observe the age- and occupation-specific regulations in this workplace when selecting
staff.
Unauthorised persons
WARNING!
Risk to unauthorised persons!
Unauthorised persons who do not comply with the requirements as
described, are not familiar with the dangers in the working area.
Therefore:
– Keep unauthorised persons away from the working area.
– In case of doubt, address persons and remove them from the working
area.
– Interrupt all activities whilst unauthorised persons are in the working
area.