Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance Download Page 115

Page: 115 / 162

Disassembly

72800153 Markoprint XB4JET / XB8JET

Seite 115 von 162

Disposal

Environmental damage due to incorrect disposal!

Electrical  scrap,  electronic  components,  lubricants  and
other  auxiliary  materials  are  subject  to  hazardous  waste
treatment  regulations  and  may  only  be  disposed  of  by
approved specialized companies!

Unless return or disposal agreements were made, submit disassembled components for
recycling:



Scrap metals.



Submit plastic components for recycling.



Dispose of other components according to material composition.

The local municipal authorities or specialized disposal companies provide information on
environmentally compatible disposal.

Summary of Contents for Markoprint XB4JET



































































































































































Search results

Summary of Contents for Markoprint XB4JET

Reviews:

Weber Markoprint XB4JET, Manual For Installation, Operation And Maintenance, Page: 115 / 162

Search results

Summary of Contents for Markoprint XB4JET

Reviews: