Weber Markoprint XB4JET, Manual For Installation, Operation And Maintenance, Page: 131 / 162

Appendix 72800153 Markoprint XB4JET / XB8JET
Seite 131 von 162 GB
Alarm connector 2 / 5+6
The alarm light (24V) will be connected to the 8-pole M12-socket.
24V voltage will be switched on the outputs. (max.100mA)
The 4 outputs are available as additional potential-free relay output for the alarm output.
PIN Color Function
1
– Out1
White Alarm red lamp
2
– Out2
Brown Warning orange lamp
3
– Out3
Green OK green lamp
4
– Out4
Yellow Reserve
5
– In 4
Grey Reserve not connected
see page 136
6
– In 8 Rose
Reserve not connected
see page 136
7 -
8 - GND Red common contact
Alarm connector 4 / 7+8
The alarm light (24V) will be connected to the 8-pole M12-socket.
24V voltage will be switched on the outputs. (max.100mA)
The 4 outputs are available as additional potential-free relay output for the alarm output.
The outputs 1 and 3 are inverse in the basic configuration. (1=green and 3=red are
changed).
If required the setting can c
hanged in „Advanced Settings“.
PIN Color Function
1
– Out5
White Alarm red lamp
2
– Out6
Brown Warning orange lamp
3
– Out7
Green OK green lamp
4
– Out8
Yellow Reserve
5
– In 3
Grey Reserve
6
– In 7 Rose
Reserve
7 - +24V Power max. 100mA
8 - GND Red common contact