34
Vancouver
Ford Transit
29. Make the following connections at the
Vancouver unit:
1. thermostat
2. blower motors
3. pressure switch
a
30. Using the drain T (32) and the drain hose (4),
connect the two drain ports together. Route
the drain hose through the headliner, down
the body in the right-rear corner and through
an existing hole in the body.
31. Trim the drain tube 1-2 inches (25-50 mm)
below the bumper cover at a 45º angle away
from the direction of travel.
a
Summary of Contents for Transit Vancouver Wagon
