Safety | 2
5111232A OI-II Webasto Next
5 / 23
2.4
Safety information for electrical
connection
WARNING
l
Comply with the nationally applicable requirements
pertaining to electrical installations, fire protection,
safety regulations and escape routes at the intended
installation location. Observe the applicable national
installation regulations.
l
Each charging station must be protected with its own
line circuit breaker and residual current circuit breaker.
See chapter 8.1, "Requirements installation space" on
page 9.
l
Make sure that the electrical connections are de-ener-
gised before connecting the charging station to the
power supply.
l
Do not connect a vehicle during initial start-up of the
charging station.
l
Make sure that the correct supply cable is used for the
power connection.
l
Do not leave the charging station unattended with the
cover open.
l
Change DIP-switch settings only with the power off.
l
Register with the power supply company as required.
2.5
Safety information for initial start-up
WARNING
l
Initial start-up of the charging station must be carried
out only by an electrician.
l
Prior to initial start-up, the electrician must check that
the charging station has been connected correctly.
l
Before starting-up the charging station, check the
charging cable, charging coupling and the charging
station for visible damage. The charging station must
not be started up if it is damaged or if the charging
cable/charging coupling is damaged.
