Ford F-250/350 Super Duty Truck
19
Integration into the Fuel System
Fuel Pump Installation
The fuel pump is mounted horizontally along the right
inside framerail using an existing hole in the frame. See
Figure 34.
– (1) Fuel pump
– (2) P-clamp, M6 nut and bolt
– (3) Vehicle framerail (right)
ATTENTION
Ensure the fuel lines are fully seated within the fuel line
couplers and any 90 degree bends are not buckled.
Refer to Figure 35.
Tighten all fuel line clamps to 1.0 - 1.4 Nm (8.8 - 12.4
lb.-in.)
Fuel Line Connection at Heater
ATTENTION
Cover fuel line with loom to protect it form sharp
edges.
Connect fuel line to heater with fuel line coupler and two
clamps.
– (1) Mecanyl fuel line
– (2) Fuel line coupler
– (3) Fuel line clamp (2 ea.)
Fig. 34
1
2
3
Fig. 35
Fig. 36
1
2
3
