Ford F-250/350 Super Duty Truck
17
ATTENTION
Clamp vehicle coolant hose with hose clamping pliers
prior to removing hose from engine outlet.
Route Webasto heater coolant inlet hose (hose going to
heater water pump) to engine outlet tube and cut to
appropriate length.
Open constant tension clamp securing coolant hose to
engine outlet tube and slide clamp back on hose.
– (1) Engine outlet coolant hose
– (2) Constant tension clamp
– (3) Engine outlet tube
Pull vehicle coolant hose off engine outlet tube and install
the Webasto heater inlet hose “A” with clamp.
Route Webasto heater outlet hose “B” to the engine
outlet tube and cut to the appropriate length. See Figure
30.
Install the 180° coolant hose “C” between the webasto
heater outlet hose “B” and the vehicle coolant hose
removed from the engine outlet tube.
– (A) Webasto heater inlet hose
– (B) Webasto heater outlet hose
– (C) 180° Webasto heater hose
– (1) Hose clamp -2ea.
– (2) Engine outlet tube
– (3) Constant tension clamp
– (4) Coolant hose from engine outlet tube
Install plastic protective loom over coolant hose
connections as shown in Figure 31.
Secure coolant hoses with nylon cable tie.
– (1) Plastic protective loom
– (2) Nylon cable tie
Fig. 29
1
2
3
Fig. 30
B
A
1
2
C
3
1
4
Fig. 31
1
2
