16
Ford F-250/350 Super Duty Truck
Coolant Hose Connections - 6.8 Liter V10
Gasoline
Cut supplied hoses as shown in Figure 26.
Hose A: From engine to coolant pump inlet - Connect the
90° end to the coolant pump at the Webasto heater.
Hose B: From Webasto heater outlet to vehicle heater
core inlet via hose C - Connect the 90° end to the heater
outlet.
Hose C: From Webasto heater outlet hose to the coolant
hose removed from the engine coolant outlet tube.
Prepare 180° coolant hose “C” for installation by
installing coolant adapters as shown in Figure 27.
– (C) 180° coolant hose
– (1) Hose clamp - 2ea.
– (2) Coolant adapter - 2ea.
ATTENTION
Install metal conduit on coolant hoses prior to
installation.
Connect 90° end of hose “A” to Webasto heater coolant
pump.
Connect 90° end of hose “B” to Webasto heater outlet.
Route coolant hoses above the inner fender splash shield
to the engine compartment.
– (A) Webasto heater inlet hose
– (B) Webasto heater outlet hose
– (1) Hose clamp - 2ea.
– (2) Coolant pump
– (3) Metal conduit
Fig. 26
A
Discard
Discard
B
C
Fig. 27
1
C
2
Fig. 28
A
B
1
1
3
2
