BDA UP 14 Z – 03/15 – REV. 0
Page 38 / 71
7 Tooling
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard and the dies.
CAUTION
+
The pneumatic Crimp Machine UP 14 Z may only be set up and operated in perfect
technical condition, observing all the safety regulations and considering any possible
dangers.
+
The crimp machine is only allowed to be used with mounted dies and safety guard.
+
When working with the pneumatic Crimp Machine UP 14 Z, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the pneumatic Crimp Machine UP 14 Z.
+
Work with caution.
+
Only one person is allowed to work on or with the machine.
+
Only trained personal are allowed to work on or with the machine.
+
Assure free access to the operating elements of the machine, especially the foot pedal.
+
It is only allowed to work with the specified air pressure.
1. Disconnect pneumatic supply.
2. Remove the locator holding fixture
2
and/or the safety guard
3
.
3. Remove special screws of die set
1
.
4. Slide the upper and lower die in the
adapter and tighten the screws.
INFORMATION
+
Control the right position of the die halves! The size of the profile should be in line!
1
3
2
Fig. 7.1
Summary of Contents for UP 14 Z
Page 22: ...BDA UP 14 Z 03 15 REV 0 Page 22 71 14 Ersatzteilliste 14 1 Explosionszeichnung Abb 14 1...
Page 25: ...BDA UP 14 Z 03 15 REV 0 Page 25 71 14 3 Pneumatik Schema Abb 14 2...
Page 47: ...BDA UP 14 Z 03 15 REV 0 Page 47 71 14 3 Pneumatic Diagram Fig 14 2...
Page 70: ...BDA UP 14 Z 03 15 REV 0 Page 70 71 14 3 Sch ma pneumatique Fig 14 2...
