WDT UP 14 Z, Operating Instructions Manual

Page: 28 / 71

BDA UP 14 Z – 03/15 – REV. 0 Page 28 / 71
1 Introduction
1.1 Product Specification
The pneumatic Crimp Machine UP 14 Z is a pneumatic crimp machine for the WEZAG
interchangeable crimping system designed as a complete table top unit. With the pneumatic
Crimp Machine UP 14 Z the most common terminals on the market can be crimped with the
WEZAG interchangeable crimping system.
According to the terminal the suitable, changeable die set will be installed into the pneumatic
Crimp Machine UP 14 Z.
By pressing the pneumatic foot pedal, the crimping cycle of the pneumatic Parallel Crimp
Machine UP 14 Z is activated and thus the operator has both hands free to insert the terminal.
All pneumatic Parallel Crimp Machines UP 14 Z are equipped with a positive closing
mechanism and guarantee a constant crimp quality.
In case of blocked jaws caused by operation or handling errors or wrongly placed terminals,
press the release button to open the jaws.
All other applications of the pneumatic Crimp Machine UP 14 Z are only permitted with a
written permission of the manufacturer. For all unauthorised applications of the pneumatic
Crimp Machine UP 14 Z the manufacturer cannot be held liable for any resultant damage or
injury
.
1.2 Conformity
The machine may only be used for the purpose specified in the operating instruction. The
manufacturers and suppliers will not be liable for any damages which may result due to the
machine being used for a purpose other than that for which it was intended.
This is done
entirely at the user’s own risk.
RoHS Information
The pneumatic Crimp Machine UP 14 Z complies with the EU-Guideline 2011/65/EU(RoHS2).
CE
The pneumatic Crimp Machine UP 14 Z is CE compliant.
The original declaration of conformity was supplied together with the invoice of the
machine.
1.3 Dealing with the Operating Instruction
The operating instruction manual contains all information concerning operating elements,
operation, commissioning and maintenance work as well as technical data.
The operating instruction must be constantly within reach of the pneumatic Crimp Machine UP
14 Z. Every machine operator must read and understand the operating instruction in order to
have safe and efficient production with this piece of equipment.
WDT ToolTech decline to accept any liability for damages that are incurred due to the fact that
the instructions on the machine or in the operation instruction have been disregarded.
The user is responsible for supplementing the operation instruction with any instructions
resulting from current national regulations for accident prevention and protection of the
environment.
The German original version is legally binding.
This operating instruction has to be guarded for later use.