User Controls
User Control Diagram
Figure 3. Card-edge User Controls
EQ Switch — SW1
The
EQ Switch
(
SW1)
is used to insert the cable equalizer into the incoming AES/EBU signal. The
D6204A can recover digital audio signals conforming to AES/EBU specifications and transmitted over
75ohm, coaxial cable, up to 600 metres (2000 ft) long without equalization. For cable lengths in excess of
600 metres, we recommend that the input equalization be activated. Note that switching the EQ in and out
can cause audible artefacts.
●
Pressing the EQ Switches SW1 or SW2 will activate the appropriate yellow EQ LED to
indicate this feature is activated.
●
While the EQ Switches SW1 or SW2 are activated pressing it again will disable the EQ
and the yellow EQ LED will go off.
Summary of Contents for D6204A
Page 4: ......
