Board Installation
Use the following procedure to install the D6204A in an openGear OG3-FR-C Series frame.
1. Refer to the User Manual of the openGear OG3-FR-C series frame to ensure that the frame
is properly installed according to instructions.
2. When using the D6204A with the T6302A for maximum I/O please note that the even
numbered slots are to be used. Plug the D6204A modules into slots 2,4,6,8,10,12,14,16,18,
and 20 for a maximum of 10 cards. Slot 1 is the left most slot as you look into the frame from
the front.
3. When using the D6204A with the T6402A for maximum density you may insert the card into
any slot for up to 20 cards per frame.
4. After selecting the desired frame installation slot, hold the D6204A card by the edges and
carefully align the card edges with the slots in the frame. Then fully insert the card into the
frame until the rear connection plugs are properly seated on the midplane and rear module.
This completes the procedure for installing the D6204A in an openGear OG3-FR-C Series frame.
Summary of Contents for D6204A
Page 4: ......
