WBS D6204A, User Manual

Page: 12 / 14

Tone Generator
‘ON’ – Generates -20dBFS line up tone. This feature requires an input signal
for reference. The tone is 1Khz when input sample rate is 48K, 2KHz at 96K
and 4KHz at 192 K.
‘OFF’ – Normal operation.
Default ​ ​ (power up default parameter settings)
‘ON’ - Get card parameters from non volatile memory, ignore dip switch
settings. (Configurable with Dashboard Control system)
‘ ​ OFF ​ ’ - ​ Get card parameters from the Dip switch.
Dashboard Enable
‘
​ ON ​
’ -
​ Only card status is available on Dashboard, users are prevented from
changing parameters.
‘
​ OFF ​
’ -
​ Normal operation, users have full access to the cards parameters.
Technical Specifications
DIGITAL INPUT
Resolution 24 Bit
Input Level 0.2-7 V p-p
Input Impedance (transformer balanced) 75 Ohm, 110 Ohm, HiZ
Sampling Frequency Range 30 kHz to 192 kHz
DIGITAL OUTPUT
Resolution 24 Bit
Output Level 1 V p-p nominal
Output Impedance 75 Ohm unbalanced
Sampling Frequency Range 30 kHz to 192 kHz
Jitter Less than 5 ns
ANALOG (fs=48 kHz, 0 dBFS = +24 dBu)
Maximum Output Level +24 dBu
Frequency Response
+/-0.2 dB, 20 Hz to 20 kHz
Nosie (un-weighted) -84 dBu ,20 Hz to 20 kHz
THD+N < 0.01%
Stereo Separation 100 dB, 20 Hz to 20 kHz
Output Impedance 60Ω Balanced
GENERAL
Power Requirements +12 V, 4Watts, MAX
Dimensions
3.025" high x 12.800" deep
Weight -0115 kg
NOTE: Ward-Beck Systems Inc. reserves the right to change performance specifications without prior
notice.