344940 REV2 03/17/2020
©
Copyright 2020 Wayne Dalton, a division of Overhead Door Corporation
14
Lift the barrel and brackets to the bracket mounting holes provided on the channel shaped outer guide. Bolt the bracket and guides together, making sure the bracket is posi-
tioned inside the guide.
IMPORTANT:
THE BOLT HEADS MUST BE ON THE INSIDE
(THREADED SECTION OUT) TO PREVENT INTERFERENCE
WITH THE OPERATION OF THE COIL.
STEP 6
ATTACHING CURTAIN.
Position the curtain assembly parallel with the door opening so that the top attachment slat is in front of the rest of the curtain (the hinged part
away from the opening).
Lift curtain assembly (centered between guide assemblies) and suspend approximately one foot below the barrel assembly, using ropes or straps of adequate strength to
safely support curtain assembly weight. Remove steel banding from around curtain assembly.
WARNING
SECURE BRACKETS TO BARREL ASSEMBLY TO PREVENT IT FROM SLIDING OFF DURING LIFTING, POSSIBLY CAUSING SEVERE OR FATAL INJURY.
CAUTION
Do not attempt to slide forks of lift truck directly between floor and curtain. Permanent door damage may result.
WARNING
CURTAIN MUST BE SECURELY ATTACHED TO LIFTING MECHANISM. OTHERWISE, CURTAIN COULD FALL CAUSING POSSIBLE SEVERE OR FATAL INJURY.
WARNING
BANDING IS UNDER TENSION. TO AVOID POSSIBLE INJURY, WEAR EYE PROTECTION AND DO NOT STAND IN FRONT OF BANDING WHEN CUTTING IT.