344940 REV2 03/17/2020
©
Copyright 2020 Wayne Dalton, a division of Overhead Door Corporation
26
STEP 16
MISCELLANEOUS FINAL CHECKLIST.
Check the area for any extra parts, and be sure these were not omitted in the installation process.
Recheck all bolted connections to verify all are securely tightened.
Clean up the area and make sure it is secure, with the handle engaged with the pin provided.
If the building owner or facility manager is unfamiliar with the product, demonstrate the operation of the door and any optional equipment before leaving the job site. Be
sure to demonstrate how to safely drop test the door and point out the importance of Pad-Locking the release handle to avoid possible tampering. Have the customer or
his representative sign off on the installation using the “Rolling Fire Door Test Drop Release Form” provided in the hardware bag and also fill out the “Test Drop Release Form”
in the back of this manual. Return a copy of form in the hardware bag to Wayne-Dalton and keep a copy in your maintenance files. Exchange all documentation and keys to
locks at this time. Be sure the customer receives a copy of this manual and of the installation drawing.
Be sure to report (in writing) to the factory any complaints or recommendations the customer may register at the completion of the
installation that may have a bearing on future designs.
IMPORTANT:
WARNING LABEL MUST BE APPLIED TO OPERATED SIDE OF THE ROLLING DOOR, ON THE GUIDE, AT EYE LEVEL.
Wayne-Dalton
Rolling Door Division
14512 Lincolnway St E
Dalton, Ohio 44618
