MOUNTING THE SENSOR
• Fix the sensor by means of two M4x25 mm cylinder head screws.
• Always comply with the mounting tolerances indicated in the figures below.
• Use the WBAX type magnetic scale for the MXAX reading head or the WBAZ for the MXAZ reading
head (refer to specific technical instructions). The arrow indicates the standard counting direction
(count up information).
• Recommended minimum bend radius of the cable: R ≥ 25 mm.
Overall dimensions
Mounting direction
Mounting
direction
M4x25 mm cylinder head
screws (2 x)
Recommended mounting tolerances
Distance from the scale
Tilt
< 1°
Distance (D) between the centre of the screw
fixing holes and the magnetic tape
without cover strip
with cover strip
31.7 mm to 33.2 mm
31.3 mm to 32.8 mm
Yaw
< 3°
Lateral deviation
1 mm
Roll
< 3°
