![background image](http://html1.mh-extra.com/html/wavion/ws-410ad/ws-410ad_installation-manual_878220035.webp)
Installing the Wavion WS-410 Metro Access Point
Installation Guide
35
3.
Connect one end of the Category 5 cable to the data protection unit.
4.
Open the connector access cover on the bottom of the WS-410 by unscrewing the two
bolts.
5.
Open the strip next to the connector access cover by unscrewing the bolt.
Figure 3.21. Opening the Strip and Connector Access Cover
6.
Select the slot that matches the diameter of the Ethernet cable and remove the rubber
plug.
Figure 3.22. Removing the Plug Matching the Diameter of the Cable
Strip
Connector
access cover
Select and
remove plug with
matching
diameter to the
Ethernet cable
Summary of Contents for WS-410AD
