![background image](http://html1.mh-extra.com/html/wavion/ws-410ad/ws-410ad_installation-manual_878220018.webp)
Installing the Wavion WS-410 Metro Access Point
18 Wavion
7.
Insert the four 8mm stainless steel hex head bolts into the tray as shown below and
tighten. Use a 5mm Allen wrench to tighten the bolts.
Figure 3.5. Attaching the Tray to the Back Plate
8.
Slide the WS-410 onto the tray. Insert three 8mm stainless steel hex head bolts from
underneath the tray into the WS-410. Use a 5mm Allen wrench to tighten the bolts.
Figure 3.6. Attaching the WS-410 to the Tray
To continue installing the WS-410, see
Insert bolts
Insert
bolts
Summary of Contents for WS-410AD
