Wavion WS-410AD, Installation Manual

Page: 39 / 66

Installing the Wavion WS-410 Metro Access Point
Installation Guide 39
The following backhaul unit can be powered by the WS-410:
•
Motorola Canopy uses 24VDC PoE input voltage. Please use the correct WS410 product
version to power the Canopy unit.
•
Alvarion VL uses 48VDC PoE input voltage (Please refer to Chapter 7: Installation
Accessories on page 53 for details on connecting the Alvarion unit to the WS410)
Safety Information for the Wavion WS-410
The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has
adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC
certified equipment. Proper operation of the Wavion WS-410 according to the instructions
found in this manual results in user exposure that is substantially below the FCC
recommended limits.
Follow these guidelines to ensure safe operation of the Wavion WS-410:
•
Do not touch or move the antennas while the unit is transmitting or receiving.
•
Make sure the antennas are connected when operating the radio or attempting to transmit
data, otherwise, the radio may be damaged.
•
Do not hold the antenna to be close to or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
•
The use of wireless devices on airplanes is governed by the Federal Aviation
Administration (FAA).
•
The use of wireless devices in hazardous locations is limited to the constraints posed by
the safety directors of such environments.
•
The use of wireless devices in hospitals is restricted to the limits set forth by each
hospital.
•
Do not operate a portable transmitter near unshielded blasting caps or in an explosive
environment.
•
The Wavion WS-410 must be used only with Wavion approved components and antennas.
F
W
ARNING
:
Make sure the backhaul unit has the correct voltage appropriate for the
installation.
N
OTE
: When using a backhaul unit that uses power supplied by the WS-410,
connect the Ethernet cable to the port labeled ETH B.
N
OTE
:
When using a Wavion injector, the WS-410 cannot supply power to the
backhaul unit.
N
OTE
:
Make sure to use the correct part number for the backhaul unit to avoid
causing damage to the unit.