Managing Network Interfaces
Rev 4.0
User Manual
46
Field
Description
Operational Rate
The rate of the data transmitted to Peer BST on the SBH link.
Rx Rate
The rate of the data received from Peer BST on the SBH link.
Tx Bytes
Amount of bytes transmitted
Rx Bytes
Amount of bytes received
RSSI
The symmetrical Rx Signal Level of the link
Details
Details of the Connected BST
Backhaul CPE Link
information
Station's MAC Address
MAC (Media Access Control) address of the associated station
Power Save State
Value of Doze in this field indicates that the associated station is in
power save mode
WMM support
Value of 'yes' in this field indicates that the associated station
supports the WMM protocol. . For more information about working
with QoS please refer to
“QoS Packet Priority”
WDS
For this feature the CPE should support WDS. “Yes” will indicate
WDS support
The supported CPE are Ubiquity NS2/PS2 running version 3.2.2, and
Ruckus running version 4.4.2.0.28.
Tx Rate [Mbps]
PHY Rate (modulation) at which the base station currently transmits
to the associated station
Rx Rate [Mbps]
PHY Rate (modulation) at which the associated station currently
transmits to the base station
SSID
SSID to which the associated station is associated (should be the
'backhaul SSID')
VLAN
VLAN name to which the station is bound. (should be the VLAN of
the 'backhaul SSID')
UL Quality
Quality of the Up Link: Reported by WBS.
◊
Good
◊
Poor
DL Quality
Quality of the Down Link: Reported by CPE
◊
Good
◊
Poor
Tx[Bytes]
Number of bytes transmitted by BST to the station
Rx[Bytes]
Number of bytes received by the BST from the station
RSSI[dBm]
The Received Signal Strength Indicator power received by the BST
from the associated station.
