24
Site Password
Defines a value that wireless receivers and other system level devices use as a password to log into the
server.
Time Zone
Defines the time zone that the system uses. When Time Zone is adjusted, the system may be non-
responsive for up to 30 seconds.
Event Processing
If checked, the Event Processing System will be enabled, offering the ability to configure for the
management of alert life cycles, logging, and reporting. Otherwise, only data protocol conversion, data
filtering, data translation, data input combining, and data output splitting functions will be available, via
the Inputs/Outputs functions.
IP Address
If non-blank, this is the IP address that the system will be assigned, as a static IP address. If blank, the
system will use DHCP to obtain an IP address.
Default Gateway
If non-blank, this is the default gateway value that the system will be assigned. This setting will only be
applied upon restart of the system.
Subnet Mask
If non-blank, this is the subnet mask value that the system will be assigned. This setting will only be
applied upon restart of the system.
Time Server
If non-blank, this is the URL to a time server. The system will, by default, attempt to connect to time
servers on the internet. If this field is non-blank, this URL will be added to the list of time servers to
attempt to connect to. This setting will only be applied upon restart of the system.
Shift 1 Start
EP
The time that shift 1 operations start, to help the system perform shift based operations, formatted as
HH:MM in 24 hour format, e.g. 08:00. If the update fails, modify your entry to match the HH:MM format
and try again.
Shift 2 Start
EP
The time that shift 2 operations start, to help the system perform shift based operations, formatted as
HH:MM in 24 hour format, e.g. 16:00. If the update fails, modify your entry to match the HH:MM format
and try again.
