60
The Proximity Threshold value can range from 50 to 250, with the higher numbers making the WaveTrac
wireless receiver less sensitive to proximity detection. This setting does not apply to Inovonics wireless
receivers.
Proximity Threshold Hi
EP
The RSSI value of the wireless signal that the associated WaveTrac Wireless Receiver will use to detect
proximity events from WaveTrac Sensors when those WaveTrac Sensors are outputting a high RF signal
level, to allow tuning of sensitivity at each receiver. The Proximity Threshold Hi column is only available
when Event Processing is enabled.
The Proximity Threshold Hi value can range from 50 to 250, with the higher numbers making the
WaveTrac wireless receiver less sensitive to proximity detection. This setting does not apply to Inovonics
wireless receivers.
Invert Polarity
EP
If checked, the wireless receiver reverses the polarity that it uses to detect a door open event, when the
wireless receiver is configured with Wander behavior. The Invert Polarity column is only available when
Event Processing is enabled.
This setting does not apply to Inovonics wireless receivers.
Repl Addr
EP
Repl Addr can be used to simplify the replacement of WaveTrac wireless receivers, where if a WaveTrac
wireless receiver address value is stored in this field, a replacement WaveTrac wireless receiver with
that address can be shipped to a customer site, allowing the customer to swap out the receiver. Once
the new receiver is detected by the system, the previously assigned behavior and settings will be
assigned to the replacement receiver.
The Repl Addr column is only available when Event Processing is enabled.
Delete
Click the Trash Can icon if you want to delete this database record.
LED Displays
The LED Displays Configuration page allows the configuration of LED displays.
