Wavetronix Click 500 Series, User Manual

Page: 68 / 109

CHAPTER 7
• CLICK 512 67
After you have made configuration changes on a driver and saved it to the Click device, the
word “current” will appear after that driver to indicate the driver that is currently loaded
onto the device.
Note
Changing any of the settings on any driver and saving them to the Click device will
change those settings on all drivers.
The Backups option can be used to read configurations that have previously been saved to
file. See Chapter 5 for more information.
Expert
The Expert driver allows you to configure the Click 512. The driver is divided into two tabs,
System
and
512
.
The
System
tab is divided into three subtabs:
General
,
Comm
, and
Autobaud
.
The
General
subtab contains information about the device (see Figure 9.99 and Table 9.2).
Figure 7.9 – Expert Driver General Tab
Setting Description
Module
Shows the name of the Click device.
Driver
Names the driver you are currently working with.
Description
Shows a description of the device being configured. This is only for
your information and does not affect the operation of the device.