4-35
Press the
Add
soft key to insert a new sweep point into the plan.
The new point will be at the same frequency as the point that was
selected when the Add soft key was pressed. You will need to set the
new point to the desired frequency using the edit box.
When you are finished editing the Reverse Sweep Plan, press the
EXIT
soft key to return to the previous screen.
4.4 HOW TO PERFORM LEVEL MEASUREMENTS
Signal levels are measured in the Level and Scan Modes. The Level
display provides both a numeric indication of signal level and an
analog meter. The audio and video carrier levels of a channel are
displayed simultaneously. Alternately, an individual carrier can be
measured (as in the case for a data or pilot carrier) or the unit can be
tuned to a specific frequency.
Summary of Contents for 3HRV
Page 51: ...4 28 4 3 5 Reverse Sweep ...
