4-11
This screen shows a list of sweep points contained within the se-
lected Reverse Sweep Plan. The list consists of the sweep point
number followed by the frequency of the sweep point. Use the up
and down arrows to scroll through the list.
Note that the frequency of the selected sweep point also appears in
the edit box below the list. You can change the frequency by using
the numeric keys followed by the
ENTER
key. The list will be
updated when the
ENTER
key is pressed.
To remove a sweep point, use the up or down arrow to select the
point to be removed, then press the
Delete
soft key.
Press the
Add
soft key to insert a new sweep point into the plan.
The new point will be at the same frequency as the point that was
selected when the Add soft key was pressed. You will need to set the
new point to the desired frequency using the edit box.
When you are finished editing the Reverse Sweep Plan, press the
Exit
soft key to return to the previous screen.
Summary of Contents for 3HRV
Page 51: ...4 28 4 3 5 Reverse Sweep ...
