Wavetek Wandel Goltermann CLI-1450, Operation Manual

Page: 90 / 102

B-1
MODEL CLI-1450
Battery Pack Location and Installation
The CLI-1450 battery pack (1019-00-0479) is located on the back
of the unit. To remove or replace the battery pack, pull the notched
tab downward, and lift the battery pack.
To install the battery pack, insert the bottom of the pack into the
groove and press down on the battery pack until it clicks into place.
WARNING: The CLI and microStealth battery packs are NOT
interchangeable. Use only the battery pack specified for use with
the CLI-1450.
Charging the Battery Pack
To recharge the battery pack, plug the AC adapter into the unit.
The unit will be fully charged in 16 hours with unit off, and 30
hours with unit operating.
Use only the AC adapter supplied with
the unit or obtained from Wavetek. Use of any other adapter could
damage the unit.
Battery Tips
The CLI-1450 is shipped from the factory only with a light charge.
You should recharge the battery upon receipt of your unit to ensure
a full charge.
B
Appendix B:
Power
Management
and Battery